準備好領略軟管泵路面拋丸機貨源直銷產品的風采了嗎？我們的視頻將帶您領略產品的每一個細節，讓您在欣賞的同時，也能深深感受到產品的價值與意義。


以下是:軟管泵路面拋丸機貨源直銷的圖文介紹


創業以來的 混凝土拋丸機以卓越的性價比和優良的服務，讓客戶采購安心，使用放心，公司將一如既往；竭誠以優質的產品、優良的服務，與國內外各行業的客商緊密合作，共圖發展我們也熱誠歡迎客戶來豫信致誠機械設備(益陽市分公司)司考察，參觀及技術交流！






工業軟管泵輸油不足的可能原因及解決方法齒輪泵故障排除10個隔油環齒輪泵應能連續供油，齒輪嚙合重疊系數應大于1。當一對齒輪未脫離嚙合時，另一對齒輪已進入嚙合狀態。這樣，當有兩對齒輪同時嚙合時，兩對齒輪的齒嚙合線之間形成一個封閉的體積，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.

 




軟管泵路面拋丸機貨源直銷

眾所周知軟管泵在運行時，是通過一根U型附有彈性的橡膠軟管來完成輸送。今天小編需要強調的是，軟管存放時間不宜過長，一般以一年為限。在停工期間，對裝有軟管的泵，若長期不用，每隔一個月需轉動泵一次。以免壓輥長時間壓在泵管的某一處，減弱管子回彈性，影響其流量的輸送。

It is well known that when the hose pump is running, it is conveyed through a U-shaped rubber hose with elasticity. Today the editor needs to emphasize that the storage time of the hose should not be too long, and it is generally limited to one year. During the shutdown period, if the pump is equipped with a hose, if it is not used for a long time, the pump needs to be rotated every other month. So as not to press the roller for a long time at a certain position of the pump tube, it will weaken the resilience of the tube and affect its flow rate.

 


點擊查看豫信致誠機械設備(益陽市分公司)的【產品相冊庫】以及我們的【產品視頻庫】