工業軟管泵不銹鋼齒輪泵，可輸送非潤滑油飲料低腐蝕性液體，配銅齒輪可輸送汽油苯等低內點液體。由于齒輪泵自吸能力差，一般是由于齒輪泵泵腔間隙較大所致。同時也是如果齒輪泵輸出端沒有“止回閥”，則必須是下一級齒輪泵的止回閥或控制閥。移動固定后，周圍工作人員可恢復手術。

Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.

軟管泵用途非常廣泛，市面上的諸多場合均可適用，如：污水泵井事故清空，污水泵站事故抽空，水廠的污水池、污泥池清空。市政下水道系統的污水、污泥清空抽排。工廠、罐車事故后的油品、液體物質、化學污泥等的緊急轉移；事故后地表沖洗水抽吸泵。消防應急水轉移；緊急供水泵站，泵內部過流部件都可配備不銹鋼，數臺泵車串聯使用可作為臨時供水泵站。軍隊、海軍部隊戰備后勤泵車。

Hose pumps are very versatile and can be applied to many occasions on the market, such as: emptying of sewage pump wells, emptying of sewage pumping stations, emptying of sewage ponds and sludge ponds in water plants. Empty sewage and sludge from municipal sewer system. Emergency transfer of oil, liquid substances, chemical sludge, etc. after the accident at factories and tankers; suction pumps for flushing water on the surface after the accident. Fire emergency water transfer; emergency water supply pump station, the internal flow parts of the pump can be equipped with stainless steel, several pump trucks in series can be used as temporary water supply pump station. Military and naval forces combat readiness logistic pump truck.

 

軟管泵的軟管設計：工業軟管泵的軟管經過特殊設計優質材料，能反復壓縮，不應與“普通軟管”混淆。有些軟管是由均勻的擠壓材料制成的，而另一些軟管有一層增強纖維內層，以增加軟管的剛度，并確保軟管在未壓縮時具有圓形截面。當擠壓管的擠壓回彈達到不合格范圍時，需要及時更換擠壓泵軟管，即使不壓縮也會使軟管保持橢圓。對于內襯軟管設計，這種“軟管疲勞”終可能導致內部開裂或分層。 在軟管完全失效之前更換，以防止工藝流體泄漏到泵中，并可能流出泵。