公司軟管泵產品驅動形式，電機+無級變速器。
主要特點：調速精度高，變速范圍大（速比可在1：1.4-1：7之間任意變化），可連續工作運轉，運轉平穩，性能穩定，噪音低，扭矩大，流量無級可調。但它的變速是需手動來調節，自動化程度不高，調速須在運轉中進行，不可停車時轉動調速手輪。它不宜用于可能超負荷或堵塞使用場合。                                 

工業軟管泵不銹鋼齒輪泵，可輸送非潤滑油飲料低腐蝕性液體，配銅齒輪可輸送汽油苯等低內點液體。由于齒輪泵自吸能力差，一般是由于齒輪泵泵腔間隙較大所致。同時也是如果齒輪泵輸出端沒有“止回閥”，則必須是下一級齒輪泵的止回閥或控制閥。移動固定后，周圍工作人員可恢復手術。

Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.

首先我們先介紹一下軟管泵，軟管泵又稱蠕動泵。為了泵體污染流體或流體污染泵體的危險性，整個泵的裝置中只有軟管與介質接觸。在一般場合下，軟管泵使用的都是天然橡膠的軟管。內層和外層都是完整光滑的天然橡膠，其目的是很強防磨損。適用于腐蝕性不高但磨損性很大的如泥漿以及無機物等等介質。而且一般適用于脂肪、油類或油脂的介質，以及有機化學物質。內層是橡膠，而外層是天然橡膠或者是復合橡膠。

First of all, lets introduce the hose pump, which is also called peristaltic pump. In order to eliminate the danger of the pump body contaminating the fluid or the fluid contaminating the pump body, only the hose in contact with the medium in the entire pump device. In general, hose pumps use natural rubber hoses. The inner and outer layers are completely smooth natural rubber, the purpose of which is to prevent abrasion. It is suitable for mediums that are not corrosive but very abrasive, such as mud and inorganic substances. And generally suitable for fats, oils or oils, and organic chemicals. The inner layer is rubber, while the outer layer is natural rubber or composite rubber.